One input voltage and three output voltage universal biquad filters with orthogonal tune of frequency and bandwidth

This research paper contributes the one input three output voltage mode universal biquad filters with linear and electronic control of the natural frequency (w0), using two commercially available ICs, LT1228s as active device with two grounded capacitors, five resistors. The presented universal biquad filters can simultaneously provide three voltage-mode filtering functions, low-pass (LP), high-pass (HP) and band-pass (BP) without changing the circuit architecture. Furthermore, the first presented biquad filter provides low impedance at HP, BP voltage output nodes and LP, BP output voltage nodes are low impedance for the second proposed filter which is easy cascade ability with other voltage mode circuits without the employment of buffer circuits. The quality factor (Q) of both proposed filters is orthogonally adjusted from the passband voltage gain and w0. The proposed filters are simulated and experimented with commercially accessible ICs, LT1228. The simulated and experimental results demonstrate the filtering performances

Single Commercially Available IC-Based Electronically Controllable Voltage-Mode First-Order Multifunction Filter with Complete Standard Functions and Low Output Impedance

This paper presents the design of a voltage-mode three-input single-output multifunction first-order filter employing commercially available LT1228 IC for easy verification of the proposed circuit by laboratory measurements. The proposed filter is very simple, consisting of a single LT1228 as an active device with two resistors and one capacitor. The output voltage node is low impedance, resulting in an easy cascade-ability with other voltage-mode configurations. The proposed filter provides four filter responses: low-pass filter (LP), high-pass filter (HP), inverting all-pass filter (AP-), and non-inverting all-pass filter (AP+) in the same circuit configuration. The selection of output filter responses can be conducted without additional inverting or double gains, which is easy to be controlled by the digital method. The control of pole frequency and phase response can be conducted electronically through the bias current (I-B). The matching condition during tuning the phase response with constant voltage gain is not required. Moreover, the pass-band voltage gain of the LP and HP functions can be controlled by adjusting the value of resistors without affecting the pole frequency and phase response. Additionally, the phase responses of the AP filters can be selected as both lagging or leading phase responses. The parasitic effects on the filtering performances were also analyzed and studied. The performances of the proposed filter were simulated and experimented with a & PLUSMN;5 V voltage supply. For the AP+ experimental result, the leading phase response for 1 kHz to 1 MHz frequency changed from 180 to 0 degrees. For the AP- experimental result, the lagging phase response for 1 kHz to 1 MHz frequency changed from 0 to -180 degrees. The design of the quadrature oscillator based on the proposed first-order filter is also included as an application example

Universal Filter Using Single Commercially Available IC: LT1228

In electrical and electronic engineering, the filter is very importance circuit. A voltage-mode three inputs single output second-order multifunction filter is presented in this paper. The proposed filter is based on RLC parallel circuit. The main active element is the commercially available IC from Linear Technology Inc, LT1228. The filter consists of single LT1228, single resistor and two capacitors. Five output second-order filter responses, namely band-pass (BP), band-stop (BS), high-pass (HP), low-pass (LP) and all-pass (AP) functions are achieved. Each output response can be selected without component matching condition and the requirement of double gain amplifier. The quality factor and natural frequency can be electronically controlled. PSpice simulation results suing macro model of LT1228 are in close agreement with the theory

Universal Filter Using Single Commercially Available IC: LT1228

In electrical and electronic engineering, the filter is very importance circuit. A voltage-mode three inputs single output second-order multifunction filter is presented in this paper. The proposed filter is based on RLC parallel circuit. The main active element is the commercially available IC from Linear Technology Inc, LT1228. The filter consists of single LT1228, single resistor and two capacitors. Five output second-order filter responses, namely band-pass (BP), band-stop (BS), high-pass (HP), low-pass (LP) and all-pass (AP) functions are achieved. Each output response can be selected without component matching condition and the requirement of double gain amplifier. The quality factor and natural frequency can be electronically controlled. PSpice simulation results suing macro model of LT1228 are in close agreement with the theory

Electronically Tunable TISO Voltage-Mode Universal Filter Using Two LT1228s

This study aims to design an electronically tunable voltage-mode (VM) universal filter utilizing commercially available LT1228 integrated circuits (ICs) with three-input and single-output (TISO) configuration. With the procedure based on two integrator loop filtering structures, the proposed filter consists of two LT1228s, four resistors, and two grounded capacitors. It realizes five filter output responses: low-pass, all-pass, band-reject, band-pass, and high-pass functions. By selecting input voltage signals, each output responses can be achieved without changing the circuit architecture. The natural angular frequency can be controlled electronically. The input voltage nodes Vin1 and Vin3 possess high impedance. The output node has low impedance, so it can be cascaded to other circuits. The performance of the proposed filter is corroborated by PSpice simulation and hardware implementation which support the theoretical assumptions. The result shows that the range of total harmonic distortion (THD) is lower than 1%, and that the higher the temperature is, the lower the natural angular frequency is